ZeroSoftware Configuration

What is ZeroSoftware Pull Printing?

Celiveo ZeroSoftware Pull Printing allows you to use HP FutureSmart devices as job storage and then collect them from any Celiveo enabled printer where the user is authenticated. ZeroSoftware Pull Printing eliminates the needs of a central Print Server or Celiveo Virtual Printer installation, this is achieved by processing jobs sent from HP UPD to any celiveo enabled printer running ZeroSofware configuration.

ZeroSoftware Requirements

Celiveo ZeroSoftware Pull Printing only requires a HP UPD (Universal Print Driver) to be installed on the end-user workstation then it needs to point to any of the celiveo enabled printer that has been configured to act as a ZeroSoftware job storage device.

How to Configure a HP FutureSmart printer to act as ZeroSoftware Job Storage in Web Admin

*Not all printers need to be configured the the following configuration. This configuration is only meant for devices that will act as Job Storage when receiving a print job from UPD. Other Devices that are only intended to be used for authentication and job release use the standard Pull Print Configuration.

1. Add a Printer to Celiveo Web-Admin. Check here on how to add a printer.
2. Go to “Printer Settings”.
   
   Printer Settings
3. Ensure that Celiveo Pull Print is checked.
4. Add the command [{ES:1}] in Celiveo Version “Comments”.
5. Press “Save”.
   
   Printer Settings - ZeroSoftware Enable Storage
6. Synchronize the selected Printer(s).
   

*Syntax: [{ ES :1}] stands for Enable Storage. [{ES: 1 }] the value indicates the number of hours that the job will remain available for release on any Celiveo enabled printer. With the [{ES:1}] configuration any jobs that are sent to the printer will be deleted after 1 hour.